Product ID: MT-A710

 

Hot Cut Type Slitting Score Air Knife ( MT-A710)

Feature :
It is controlled by air pressure so there is small volume , easy to operate. Heater slitting produced by special compound material also temperature heating up fast, working temp. is steady, long life-span. The highest temp. is above 600℃ and general heater slitting can not compare with it .
◎ steady temp. control ◎ good heat preserving ◎ fast heating up effective


Notice :
1. The power source of MT-A710 type is 220V single phase, it also can be ordered by other requirement.
2. The surface of bottom roller needs to have hardness process or abrasion-resistant process for increasing
   life-span , the dimension of roller is unlimited , it can be adjusted according to real condition. But it must be
   powerful and best distance is 10mm between surface of roller and heater slitting knife.
3. The supply air pressure can not be over 1.2Kg/cm², it will avoid not to have over abrasion of heater slitting
   knife and roller by much pressure to reduce life-span.
4. The incision of heater slitting knife is 30mm length, every point can be used to slit so guide bar which fixed
   MT-A710 should take adjustable long hole fixing way in order to have more using benefit by change of
   slitting point when slitting knife is abrasion.
5. The included angle of slitting knife is 45°, it can be grinded to angle you needed by practical slitting materials.

Slitting products available :
Nylon, Polyester, woven material, it can melt edge in order not to be loosen when heater slitting.
PE , PP membrane, it can melt and cutting 2 levels material when heater slitting.

 
MT-A710 Specifications
Max air pressure 1.54(kg/cm²)
Max. knife stroke 15(mm)
Blade hardness HRC 53° ~ 58°
Max. heater voltage 12V
Max. heater currents 7.5A
Heater power 90W
Working temp. 0 ~ 600℃
Heater Dia. φ5mm
Heater sheah Incolony
Min. slitting width 12(mm)
Conductor material 鎳鉻 8020
Max. heater temp. 950℃

or


Hot Cut Type Slitting Score Air Knife
Hot Cut Type Slitting Score Air Knife

or

 

Contact Detail

CEO:Mr. J.C. Wang
Sales Contact:CEO J.C. Wang
Address:No. 25, Alley 26, Lane 1, Sinyi Rd., Banciao City Taipei County, 220 Taiwan
TEL:886-2-89533850
FAX:886-2-89533852
Email:rich.prepare@msa.hinet.net
URL:http://www.etontech.com.tw

Keywords


Only search title

Copyright © 2012 E-Ton Co., Ltd. All rights reserved.